Skip navigation
You are viewing our beta course page.

Electrical and Electronic Engineering with Renewable Energy

Study level:
Undergraduate

Course summary

Electrical and Electronic Engineering is at the core of the modern world, from computers, to digital circuits, photonics and a wealth of electronics. This 5-year MEng degree puts electrical and electronic engineering into the context of Renewable Energy Engineering and is ideally suited to somebody who wishes to focus their electrical and electronic skills on this particular growing industry, where technology continues to change and new, creative solutions continuously being sought.

The University of Aberdeen has a proven track record of preparing graduates for the Energy sector. Consequently, we have recruited specialist staff in our engineering school and attracted highly-regarded industrial experts from the energy industry who contribute to the relevant taught modules. After laying a strong foundation of basic and advanced electrical and electronic engineering concepts in the first four years (similar structure to the straight MEng Electrical and Electronic Engineering), the programme offers students to enhance their knowledge specifically in aspects related to renewable energy. The programme prepares the students to take up exciting careers designing long-distance high-voltage transmission lines, biofuel plants, geothermal and tidal wave extractors or large solar farms.

One of the main features of the programme is its focus on all renewable energy sources; solar & geothermal, wind, marine, hydro power and biomass fuel. Many renewable related degree programmes focus solely on one area of the sector but we intentionally provide an overview of them all so you have the best opportunity of gaining a successful career upon graduation.

The first two years cover general Engineering, with elements of Chemical, Mechanical, Petroleum and Electrical/Electronics, as well as Civil. In the later years you specialise, following your chosen discipline in greater depth. You do not need to finalise your choice of specialisation until you begin third year.

It is possible to move between MEng and BEng and this can be accomplished at any point until the second half session of fourth year. Successful BEng candidates will be offered the chance to change to the MEng and there is no quota, meaning that if grade requirements are met that transfer is guaranteed.

Ranked 12th UK, 1st in Scotland for General Engineering (Complete University Guide 2022)
Ranked 12th UK, 2nd in Scotland for General Engineering (Guardian 2022)

Modules

The first two years cover general Engineering, with elements of Chemical, Mechanical, Petroleum and Electrical/Electronics, as well as Civil. In the later years you specialise, following your chosen discipline in greater depth. You do not need to finalise your choice of specialisation until you begin third year.

It is possible to move between MEng and BEng and this can be accomplished at any point until the second half session of fourth year. Successful BEng candidates will be offered the chance to change to the MEng and there is no quota, meaning that if grade requirements are met that transfer is guaranteed.

Assessment method

Students are assessed by any combination of three assessment methods: coursework such as essays and reports completed throughout the course; practical assessments of the skills and competencies they learn on the course; and written examinations at the end of each course. The exact mix of these methods differs between subject areas, years of study and individual courses.

Honours projects are typically assessed on the basis of a written dissertation.

Professional bodies

Professionally accredited courses provide industry-wide recognition of the quality of your qualification.

  • Engineering Council
  • European Federation of National Engineering Associations

Discover University of Aberdeen

Learn what it's like to study at University of Aberdeen. From key stats to campus highlights, open days, and more - find everything you need to know here.

Discover now

How to apply

Apply by
31 January

This is the deadline for applications to be completed and sent for this course. If the university or college still has places available you can apply after this date, but your application is not guaranteed to be considered.

Application codes

Course code:
H6H6
Institution code:
A20
Campus name:
Main Site
Campus Code:
-

Points of entry

The following entry points are available for this course:

  • Year 1

International applicants

When you are thinking about studying overseas, it is important that you understand all the costs involved and budget accordingly. It is essential to budget for your studies prior to leaving your home country and to arrange all your funding for BOTH your tuition fees and your living costs.

Open days

Entry requirements

Qualification requirements

A level - ABB

AB required in Mathematics and Physics or a B in Design and Technology or a B in Engineering. If applicant presents with B in Physics, Design and Technology or Engineering, Mathematics must be A grade. GCSE English at C.

Pearson BTEC Level 3 National Extended Diploma (first teaching from September 2016) - DDD

DDD with Mathematics and Physics required. GCSE at C or above in English or English Language, Mathematics and in either Chemistry or Physics or Dual Award Science. Note: BTEC in Applied Sciences is not normally sufficient on its own for entry into any of our Engineering programmes.

Scottish Higher - AABB

Applicants who achieve AABB or better over S4 and S5 are likely to be made an offer of admission. This may be unconditional or conditional, depending upon academic profile. Good performance in additional Highers / Advanced Highers may be required. Note: we do not double count a Higher and Advanced Higher in the same subject, but we do consider that a B at Adv Higher is equivalent to an A grade at Higher.

International Baccalaureate Diploma Programme - 34 points

34 Points including Mathematics and Physics at HL (6 or above) and English at Standard Level.

Leaving Certificate - Higher Level (Ireland) (first awarded in 2017) - H2, H2, H2, H2, H3

5 subjects at Higher, with 4 at H2 and 1 at H3 H2 or above in mathematics and H3 or above in Physics required.

English language requirements

TestGradeAdditional details
IELTS (Academic)6Overall - 6.0 with: Listening - 5.5 or above; Reading - 5.5 or above; Speaking - 5.5 or above; Writing - 6.0 or above. IELTS Indicator or IELTS General Training are not accepted.
TOEFL (iBT)78TOEFL iBT and TOEFL Home Edition (online) - DI code is 0818: Overall 78 with: Listening - 17 or above; Reading - 18 or above; Speaking - 20 or above; Writing - 21 or above.
PTE Academic59Overall - 59 with: Listening - 59 or above; Reading - 59 or above; Speaking - 59 or above; Writing - 59 or above. Online Test is not accepted.
Trinity ISEPassPass overall at ISE II with a distinction in writing and merit in the other three skills.
Institution's Own TestAcademic English Pre-sessional Programmes - Pass (valid for one year) OR Academic English Preparation Programme - Pass at Level Four (valid for one year)
Cambridge English AdvancedCOverall - 169 with: Listening - 162; Reading - 162; Speaking - 162; Writing -169.
Cambridge English ProficiencyCOverall - 169 with: Listening - 162; Reading - 162; Speaking - 162; Writing -169.
To study for an undergraduate degree at the University of Aberdeen it is essential that you can speak, understand, read, and write academic English fluently. These skills will allow you to understand lectures, produce high standards of written work, and perform well in examinations. We can assess your English language proficiency through a variety of means: through your nationality, through the qualifications you gained in high school, or through a recognised English language test. Please note certification must be within the two years prior to commencement of your degree programme, unless otherwise stated.

Please use the checklist at the following webpage to determine how you can meet our English language requirements: https://www.abdn.ac.uk/study/international/undergraduate-degrees-english-requirements-268.php

Historical entry grades data

This section shows the range of grades students were previously accepted with - learn more. It is designed to support your research but does not guarantee whether you will or won't get a place. Admissions teams consider various factors, including interviews, subject requirements, and entrance tests. Check all course entry requirements for eligibility.

Not available

Historical entry grades data is not currently available for University of Aberdeen - we are working with them to try and make it available soon - learn more.

Student Outcomes

Operated by the Office for Students

90 Employment after 15 months (Most common jobs)

100 Go onto work and study

The number of student respondents and response rates can be important in interpreting the data – it is important to note your experience may be different from theirs. This data will be based on the subject area rather than the specific course. Read more about this data on the Discover Uni website.

Fees and funding

Tuition fees

LocationFeeYear
Republic of Ireland£9250Year 1
International£24800Year 1
England£9250Year 1
Northern Ireland£9250Year 1
Wales£9250Year 1
Channel Islands£9250Year 1
EU£24800Year 1
Scotland£1820Year 1

Tuition fee status depends on a number of criteria and varies according to where in the UK you will study. For further guidance on the criteria for home or overseas tuition fees, please refer to the UKCISA website.

Additional fee information

EU/International Applicants: When you are thinking about studying overseas, it is important that you understand all the costs involved and budget accordingly. It is essential to budget for your studies prior to leaving your home country, and arrange all your funding for BOTH your tuition fees and your living costs.

Sponsorship information

View the University of Aberdeen Online Prospectus programme page to find out about any scholarships and funding you may be able to apply for.

Like this page