University of Aberdeen - Medicine Open Day
7 Jun 2025, 10:00
Aberdeen
You are viewing our beta course page.
Course summary
Robotics engineers design, build and develop machines and systems for sectors as diverse as manufacturing, energy, aerospace, transport and healthcare. This programme combines electrical and electronic engineering with robotics and artificial intelligence to equip you with the knowledge and skills for a career in the booming robotics and automation sector.
As the worldwide manufacturing industry enters its fourth revolution, (Industry 4.0), innovations in robotics and automation are set to revolutionise almost every sector, from manufacturing and energy, to transport, logistics and healthcare. The MEng Electrical and Electronic Engineering with Robotics allows you to gain an advanced understanding of the core electrical and electronic engineering principles and then apply this knowledge to the design and creation of cutting-edge autonomous intelligent systems.
You will use your imagination and creativity to design and build robotic systems and gain hands-on experience via our labs and research groups, including, our state-of-the-art robotics laboratory, laser laboratory facilities and the Aberdeen HVDC Research Centre. You will learn the key skills in demand by industry today, including kinematics, dynamics and control of robotic arms, as well as the key techniques for enabling mobile robots to localise themselves, map their environments or do both simultaneously.
The first two years cover general Engineering, with elements of Chemical, Mechanical, Petroleum and Electrical/Electronics, as well as Civil. In the later years you specialise, following your chosen discipline in greater depth. You do not need to finalise your choice of specialisation until you begin third year.
It is possible to move between MEng and BEng and this can be accomplished at any point until the second half session of fourth year. Successful BEng candidates will be offered the chance to change to the MEng and there is no quota, meaning that if grade requirements are met that transfer is guaranteed.
Ranked 12th UK, 1st in Scotland for General Engineering (Complete University Guide 2022)
Ranked 12th UK, 2nd in Scotland for General Engineering (Guardian 2022)
Modules
The first two years cover general Engineering, with elements of Chemical, Mechanical, Petroleum and Electrical/Electronics, as well as Civil. In the later years you specialise, following your chosen discipline in greater depth. You do not need to finalise your choice of specialisation until you begin third year.
It is possible to move between MEng and BEng and this can be accomplished at any point until the second half session of fourth year. Successful BEng candidates will be offered the chance to change to the MEng and there is no quota, meaning that if grade requirements are met that transfer is guaranteed.
Assessment method
Students are assessed by any combination of three assessment methods: coursework such as essays and reports completed throughout the course; practical assessments of the skills and competencies they learn on the course; and written examinations at the end of each course. The exact mix of these methods differs between subject areas, years of study and individual courses.
Honours projects are typically assessed on the basis of a written dissertation.
Discover University of Aberdeen
Learn what it's like to study at University of Aberdeen. From key stats to campus highlights, open days, and more - find everything you need to know here.
How to apply
Apply by
31 January
This is the deadline for applications to be completed and sent for this course. If the university or college still has places available you can apply after this date, but your application is not guaranteed to be considered.
Application codes
- Course code:
- H6H7
- Institution code:
- A20
- Campus name:
- Main Site
- Campus Code:
- -
Points of entry
The following entry points are available for this course:
- Year 1
International applicants
When you are thinking about studying overseas, it is important that you understand all the costs involved and budget accordingly. It is essential to budget for your studies prior to leaving your home country and to arrange all your funding for BOTH your tuition fees and your living costs.
Entry requirements
Qualification requirements
A level - ABB
AB required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry. If applicant presents with B in Physics, Design & Technology or Engineering, Mathematics must be A grade. GCSE English at C.
Applicants who are predicted to achieve the Standard entry requirements are encouraged to apply and may be made a conditional offer of admission.
Pearson BTEC Level 3 National Extended Diploma (first teaching from September 2016) - DDD
DDD with Mathematics and Physics required. GCSE at C or above in English or English Language, Mathematics and in either Chemistry or Physics or Dual Award Science.
Note: BTEC in Applied Sciences is not normally sufficient on its own for entry into any of our Engineering programmes.
Scottish Higher - AABB
Applicants who achieve AABB or better over S4 and S5 are likely to be made an offer of admission. This may be unconditional or conditional, depending upon academic profile. Good performance in additional Highers / Advanced Highers may be required.
Note: we do not double count a Higher and Advanced Higher in the same subject, but we do consider that a B at Adv Higher is equivalent to an A grade at Higher.
International Baccalaureate Diploma Programme - 34 points
34 Points including Mathematics and Physics at HL (6 or above) and English at Standard Level.
Leaving Certificate - Higher Level (Ireland) (first awarded in 2017) - H2, H2, H2, H2, H3
5 subjects at Higher, with 4 at H2 and 1 at H3
H2 or above in mathematics and H3 or above in Physics required.
Find out more about qualification requirements for this course.
English language requirements
| Test | Grade | Additional details |
|---|---|---|
| IELTS (Academic) | 6 | Overall - 6.0 with: Listening - 5.5 or above; Reading - 5.5 or above; Speaking - 5.5 or above; Writing - 6.0 or above. IELTS Indicator or IELTS General Training are not accepted. |
| TOEFL (iBT) | 78 | TOEFL iBT and TOEFL Home Edition (online) - DI code is 0818: Overall 78 with: Listening - 17 or above; Reading - 18 or above; Speaking - 20 or above; Writing - 21 or above. |
| PTE Academic | 59 | Overall - 59 with: Listening - 59 or above; Reading - 59 or above; Speaking - 59 or above; Writing - 59 or above. Online Test is not accepted. |
| Trinity ISE | Pass | Pass overall at ISE II with a distinction in writing and merit in the other three skills. |
| Institution's Own Test | Academic English Pre-sessional Programmes - Pass (valid for one year) OR Academic English Preparation Programme - Pass at Level Four (valid for one year) | |
| Cambridge English Advanced | C | Overall - 169 with: Listening - 162; Reading - 162; Speaking - 162; Writing -169. |
| Cambridge English Proficiency | C | Overall - 169 with: Listening - 162; Reading - 162; Speaking - 162; Writing -169. |
To study for an undergraduate degree at the University of Aberdeen it is essential that you can speak, understand, read, and write academic English fluently. These skills will allow you to understand lectures, produce high standards of written work, and perform well in examinations.
We can assess your English language proficiency through a variety of means: through your nationality, through the qualifications you gained in high school, or through a recognised English language test. Please note certification must be within the two years prior to commencement of your degree programme, unless otherwise stated.
Please use the checklist at the following webpage to determine how you can meet our English language requirements: https://www.abdn.ac.uk/study/international/undergraduate-degrees-english-requirements-268.php
Historical entry grades data
This section shows the range of grades students were previously accepted with - learn more. It is designed to support your research but does not guarantee whether you will or won't get a place. Admissions teams consider various factors, including interviews, subject requirements, and entrance tests. Check all course entry requirements for eligibility.
Not available
Historical entry grades data is not currently available for University of Aberdeen - we are working with them to try and make it available soon - learn more.
Fees and funding
Tuition fees
| Location | Fee | Year |
|---|---|---|
| Republic of Ireland | £9250 | Year 1 |
| International | £24800 | Year 1 |
| England | £9250 | Year 1 |
| Northern Ireland | £9250 | Year 1 |
| Wales | £9250 | Year 1 |
| Channel Islands | £9250 | Year 1 |
| EU | £24800 | Year 1 |
| Scotland | £1820 | Year 1 |
Tuition fee status depends on a number of criteria and varies according to where in the UK you will study. For further guidance on the criteria for home or overseas tuition fees, please refer to the UKCISA website.
Additional fee information
EU/International Applicants: When you are thinking about studying overseas, it is important that you understand all the costs involved and budget accordingly. It is essential to budget for your studies prior to leaving your home country, and arrange all your funding for BOTH your tuition fees and your living costs.
Sponsorship information
View the University of Aberdeen Online Prospectus programme page to find out about any scholarships and funding you may be able to apply for.
University of Aberdeen
Directorate of External Relations
King's College
Aberdeen
AB24 3FX
Visit our website Visit our course page
Course contact details
Directorate of External Relations
Email:study@abdn.ac.uk
Phone:+44 (0) 1224 272090
Like this page