Skip navigation

Chemical Engineering with Industrial Experience

  • MEng (Hon)
  • 4 Years
  • Sandwich
  • 21 September 2026
  • Undergraduate
Main Site
More about University of Manchester

Course options

2025-20262026-2027
Apply

Course summary

Begin your journey towards a challenging yet rewarding career in chemical engineering by studying at the subject's birthplace: Manchester. In this four-year MEng degree you will not only learn the fundamentals of this key subject; you'll also have the opportunity to gain invaluable experience working as a chemical engineer on a year-long industrial placement.

The placement, which you will undertake in your third year, is fully embedded within the course, meaning you can gain industrial experience while being supported throughout from an industrial and academic supervisor. We work with your placement to ensure you complete significant projects to produce a project-based dissertation, logbook and poster presentation. Two modules, Catalytic Reaction Engineering and Advanced Engineering Separations, you'll study by distance learning during the placement year.

You will have the opportunity to work for an esteemed company; previous placements have been with the likes of AkzoNobel, AstraZeneca, Bosch, Exxon Mobil, GlaxoSmithKline, JaguarLandRover, Rolls Royce, Tata Steel, Unilever, and many more.

At Manchester, all of our programmes are accredited by the Institution of Chemical Engineers (IChemE), meaning your education will equip you to graduate with an industrially approved degree. There will be emphasis on the technical aspects of chemical engineering, and these revolve around managing the behaviour of materials and chemical reactions, as well as predicting and manipulating compositions, flows, temperatures, and pressures of solids, liquids and gases. This is balanced with process safety and sustainability, which are inherent to all of our programmes. The latter is heavily embedded within your third-year design project. Here, you will undertake an open-ended team project to design a complete production process. Examples have included the sustainable production of chemicals such as propylene oxide and ethylene glycol from waste, and our design teams have won more IChemE Macnab-Lacey Prize for their efforts than any other university.

Ways to study this course

Campuses

  • Main Site

Study options

  • MEng (Hon) • Sandwich • 4 Years

Start dates

  • 21 September 2026

Apply by
14 January

This is the equal consideration deadline. You can still apply after this date, but your application may not receive guaranteed consideration.

Application codes

Course code:
H803
Institution code:
M20
Campus name:
Main Site
Campus Code:
-
Points of Entry:
Year 1

University of Manchester has participated in the Teaching Excellence Framework. These ratings were awarded in 2023, for four years.

See why these ratings were awarded
What does this TEF outcome mean?

How to apply

Apply by
14 January

This is the deadline for applications to be completed and sent for this course. If the university or college still has places available you can apply after this date, but your application is not guaranteed to be considered.

Application codes

Course code:
H803
Institution code:
M20
Campus name:
Main Site
Campus Code:
-

Points of entry

The following entry points are available for this course:

  • Year 1

Entry requirements

UCAS Tariff Not accepted

A level A*AA

A*AA including Mathematics and either Chemistry or Physics.

If you do not have the required grades or subjects you may want to consider our integrated foundation year.

Practical skills are a crucial part of science education and therefore there will be a requirement to pass the practical element of any science A-level taken. Where applicants are applying for science and related degrees, this is likely to be made explicit in the offers you will receive.

Typical Contextual Offer: AAA including Mathematics and either Chemistry or Physics.

Please check for specific GCSE/IGCSE subject entry requirements below.

Contextual offers are available for applicants who:

  • live in the UK and will be under the age of 21 on 1 September of the year they will start their course; and
  • live in an area of disadvantage or with low progression into higher education; and
  • have attended a UK school or college for their GCSEs or A-levels (or equivalent qualifications) that has performed below the national average over multiple years.
    See our contextual admissions page for full details and to check your eligibility.

Pearson BTEC Level 3 National Extended Diploma (first teaching from September 2016) DDD

We consider the National Extended Diploma for entry provided it is in Engineering or Applied Science. We require grades DDD plus A-level Mathematics at grade A*.

Access to HE Diploma

We require a QAA-recognised Access to HE Diploma (a minimum of 60 credits overall with at least 45 at Level 3), with distinction in a subject area relevant to the chosen course.

Access to HE Diplomas will normally only be considered in conjunction with A-levels. Please contact the Admissions Team for further information before applying.

Scottish Higher

Scottish Advanced Highers are normally required in one of the following combinations:

Three Advanced Highers with grades AAA, including Mathematics and at least one from Chemistry or Physics.

Or

Two Advanced Highers with grade AA including Mathematics and either Chemistry or Physics and two Highers with grades AA in additional subjects.

English Language and Mathematics not taken at Higher/Advanced Higher must have been achieved at SCQF level 5 (minimum National 5 grade C / Intermediate 2 grade C / Standard Grade Credit level grade 3).

AS

AS level results are not considered as part of the standard admissions process at The University of Manchester.

Pearson BTEC Level 3 National Diploma (first teaching from September 2016) DD

We consider the National Diploma for entry provided it is in Engineering or Applied Science. We require grades DD plus A-level Mathematics at grade A*.

Pearson BTEC Level 3 National Foundation Diploma (first teaching from September 2016) M

We consider the National Foundation Diploma for entry provided it is in Engineering or Applied Science. We require grade M plus A-level Mathematics and either Chemistry or Physics at grades A*A in any order.

Pearson BTEC Level 3 National Extended Certificate (first teaching from September 2016) D

We consider the National Foundation Diploma for entry provided it is in Engineering or Applied Science. We require grade D plus A-level Mathematics and either Chemistry or Physics at grades A*A in any order.

Scottish Advanced Higher

Scottish Advanced Highers are normally required in one of the following combinations:

Three Advanced Highers with grades AAA, including Mathematics and at least one from Chemistry or Physics.

Or

Two Advanced Highers with grade AA including Mathematics and either Chemistry or Physics and two Highers with grades AA in additional subjects.

English Language and Mathematics not taken at Higher/Advanced Higher must have been achieved at SCQF level 5 (minimum National 5 grade C / Intermediate 2 grade C / Standard Grade Credit level grade 3).

International Baccalaureate Diploma Programme 37 points

Scottish Advanced Highers are normally required in one of the following combinations:

Three Advanced Highers with grades AAA, including Mathematics and at least one from Chemistry or Physics.

Or

Two Advanced Highers with grade AA including Mathematics and either Chemistry or Physics and two Highers with grades AA in additional subjects.

English Language and Mathematics not taken at Higher/Advanced Higher must have been achieved at SCQF level 5 (minimum National 5 grade C / Intermediate 2 grade C / Standard Grade Credit level grade 3).

Welsh Baccalaureate - Advanced Skills Challenge Certificate (last awarded Summer 2024)

The University welcomes and recognises the value of the Welsh Baccalaureate Advanced Diploma/Advanced Skills Challenge Certificate and consider this alongside two A-levels or equivalent.

We require grade A in the Welsh Baccalaureate Advanced Diploma/Advanced Skills Challenge Certificate plus A-level Mathematics and either Chemistry or Physics at grades A*A in any order.

Extended Project

The University recognises the benefits of the Extended Project Qualification (EPQ) and the opportunities it provides for applicants to develop independent study and research skills. Although the Extended Project will not be included in the conditions of your offer, we encourage you to provide information about the EPQ in your application.

GCSE/National 4/National 5

Applicants must demonstrate a broad general education, typically five GCSEs/IGCSEs, including acceptable levels of literacy and numeracy, equivalent to at least Grade C/4 in GCSE/IGCSE English Language and Mathematics. GCSE/IGCSE English Literature will not be accepted in lieu of GCSE/IGCSE English Language.

OCR Cambridge Technical Extended Diploma DDD

We consider the Technical Extended Diploma in Engineering. We require grades DDD plus A-level Mathematics at grade A*.

OCR Cambridge Technical Diploma DD

We consider the Technical Diploma in Engineering. We require grades DD plus A-level Mathematics at grade A*.

OCR Cambridge Technical Foundation Diploma

We consider the Technical Foundation Diploma in Engineering. We require grade D plus A-level Mathematics and either Chemistry or Physics at grades A*A in any order.

OCR Cambridge Technical Extended Certificate D

We consider the Technical Extended Certificate in Engineering. We require grade D plus A-level Mathematics and either Chemistry or Physics at grades A*A in any order.

T Level Not accepted

The University recognises a number of foundation programmes as suitable for entry to this undergraduate programme.

Applicants completing the INTO Manchester in partnership with The University of Manchester International Foundation Programme in are required to achieve grades A*AA, including Mathematics and Chemistry or Physics and grade B in English for Academic Purposes (EAP).

Applicants completing the NCUK International Foundation Programme are required to achieve A*AA, including Mathematics and Chemistry or Physics and grade B in English for Academic Purposes (EAP).

Applicants studying other Foundation programmes should contact the Admissions Team to check if their qualification is recognised for entry to this programme and for specific entry requirements.

Additional entry requirements

Interview
Audition

English language requirements

TestGradeAdditional details
IELTS (Academic)6.56.5 overall with no less than 6.5 in any component
TOEFL (iBT)9090 overall with no subscore below 22
All applicants to the University (from the UK and Overseas) are required to show evidence of English Language proficiency. The minimum English Language requirement for this course is either: - GCSE/iGCSE English Language grade 4/C - IELTS 6.5 with no less than 6.5 in each component - TOEFL iBT 90 with no subscore below 22 - An acceptable equivalent qualification Please note that if you hold English as a Second Language iGCSE qualification, we may also require you to offer one of our acceptable equivalents or achieve a higher grade in your iGCSE than the one stated above.

Acceptable English Language Qualifications https://www.manchester.ac.uk/study/international/admissions/language-requirements/

Contextual admissions

Universities and colleges consider more than grades when assessing applications and may make offers based on a range of criteria. Learn more about contextual offers.

We operate contextual admissions meaning many applicants receive an offer and are admitted at least one grade below standard entry requirements. Entry requirements for applicants meeting contextual admissions criteria are listed next to the standard entry requirements on course profiles.

Contextual admissions means we consider your application in context helping us to ensure everyone has a fair chance of getting into Manchester. The data we use is automatically provided on your UCAS form.

Learn more on the University of Manchester website

Historical entry grades data

This section shows the range of grades that students who received offers were previously accepted on to this course with (learn more).

It is designed to support your research but does not guarantee whether you will or won't get a place.

Admissions teams consider various factors, including interviews, subject requirements, and entrance tests. Check all course entry requirements for eligibility.

Not enough data available

We are unable to show previous accepted grades for this course. This could be because the course is new, it's a postgraduate course, there isn't enough historical data, or the provider has opted out of sharing their entry grades data for this course - learn more.

Fees and funding

Tuition fees

No fee information has been provided for this course

Tuition fee status depends on a number of criteria and varies according to where in the UK you will study. For further guidance on the criteria for home or overseas tuition fees, please refer to the UKCISA website.

Additional fee information

No additional fees or cost information has been supplied for this course, please contact the provider directly.

Related courses

At University of Manchester

Like this page